Digital Class A/B Bi-Directional Amplifiers

HONBDA-A, HONBDA-D, HONBDA-BTTY

The Fiplex by Honeywell Digital Class A/B BDAs and BBU are Channel Selective, software programmable or adjustable bandwidths UL2524 2nd Edition Listed Digital signal boosters for In-Building 2-way Emergency Radio Communication Enhancement, BBU with option to install NOTIFIER monitor module in field for NOTIFIER Fire alarm panel connection or use relay outputs for (non NOTIFIER) Fire Alarm Panel connection.

Digital Signal Boosters:

  • PS 700 + PS 800: Supports Public Safety 700 & 800 MHz in single or dual band versions with FirstNet Band 14,  0.5W/+27 dBm & 2W/+33 dBm Power versions. Field Upgradeable Digital 700/800MHz from Single to Dual Band, from Class B to Class A, from 0.5W to 2W
  • VHF & UHF: Single VHF or UHF and dual band options,  Simultaneous dual band 136 - 174 MHz & 450 - 512 MHz with multiple sub band options in UHF
  • 5W options available for PS700/PS800, VHF and UHF
  • Channel Selective (Class A) or Band Selective (Class B), software programmable or adjustable bandwidths for PS700/PS800
  • Fully digital signal boosters, FPGA based
  • Auto diagnostic
  • Uplink and downlink squelch, per channel and per time slot on channel selective mode
  • User adjustable gain control, UL and DL independent, per band, per channel and per time slot on channel selective mode
  • Automatic gain control per band, per channel, per time slot
  • Oscillation detection with alarm and auto-shutdown
  • Antenna Isolation measurement feature
  • Antenna Isolation alarm
  • Built-in input and output spectrum analyzer
  • Weatherproof enclosure, NEMA4
  • NFPA compliant with dry contact alarms
  • PS700 and PS800 High capacity versions (64 channels)
  • Country of Origin: USA
  • 3-year warranty
  • IFC & NFPA compliance; UL2524 2nd Edition Listing Applications

Remote / External Annunciators:

  • NFPA Compliant
  • LED alarm indicators
  • Model with Form C alarm relays or No relays
  • Works with BBU models
  • Quick connection with BBUs
  • IFC & NFPA compliance; UL2524 2nd Edition
  • Country of Origin: USA
  • 3-year warranty

Battery Backup Systems(BBU):

  • NFPA Compliant
  • Up to 24 hour version for 2W and 12 hour for 5W
  • AC Input, 24 Volt DC Output
  • NEMA-4 Rated BBU Enclosure
  • Up to 4 Annunciators may be connected to one BBU
  • Tamper Proof with Lock and Key Accessibility
  • IFC & NFPA compliance; UL2524 2nd Edition
  • Country of Origin: USA
  • 3-year warranty (excluding batteries)
  • Common Battery Backup Systems to support BDA, Fiber DAS Master/Remote

Specifications

PS 700 + PS 800 DIGITAL SIGNAL BOOSTERS:


Specification Value
Type Dual Band Digital Signal Booster
Frequency range 758-775 / 788-805 MHz or 764-776 / 794-806 MHz (software adjustable) & 806-824 / 851-869MHz 
Passband BW. min 100KHz to full band or Channel Selective (After Upgrade to Class A) 
Number of Passband 2 BWA per band or 32 channel filters + 2 BWA per band (After Upgrade to Class A) 
Channel Filter Options 150KHz, 100Khz, 75KHz, 62.5KHz, 50KHz, 37.5KHz, 25KHz and 12.5KHz (After Upgrade to Class A) 
BWA Filters Adjustable from 100KHz to full band in step in steps of 50KHz 
Gain, maximum 85 dB
Passband ripple +/- 2.0 dB
Gain, manual control 30dB range, digitally controlled in 1dB steps, per link, per band 
Antenna isolation Max Gain + 20dB
Composite output power, DL +27dBm or +33dBm (After Upgrade to 2W) per band
Composite output power, UL +27dBm
IMD <>
Noise figure 9.0dB max
Group delay

Band Selective: 3.5 to 6.5µS, depending on BWA

  • Or After Class A upgrade
  • Channel Selective 150KHz, 11.5µS
  • Channel Selective 100KHz, 13.5µS
  • Channel Selective 75KHz, 16.0µS
  • Channel Selective 62.5KHz, 18.0µS
  • Channel Selective 50KHz, 21.0µS
  • Channel Selective 37.5KHz, 25.5µS
  • Channel Selective 25KHz, 35.0µS
  • Channel Selective 12.5KHz, 61.5µS 
Maximum input power, no damage +5dBm (UL) +5dBm (DL)
Maximum input power, normal operation 0dBm (UL) 0dBm (DL)
Connectors N(f) as standard
RF Input/Output impedance 50Ω
Uplink squelch function Yes, user selectable, to avoid UL noise when no carriers present, per band, per time slot and per channel (on Class A mode) 
Self diagnostic platform Microprocessor based
Alarms Yes, amplifiers status, power amplifiers status, power supply failure, temperature, AGC, RF overload, donor antenna failure, VSWR Indoor, oscillation. 
Local management and supervising Local access via USB
RoHS compliance Yes
Power Supply AC 110 VAC, 50/60 Hz or DC +24VDC (depending on configuration) 
Power consumption 65W or 80W (After Upgrade to 2W) 
Housing NEMA 4 
Temperature range -13º to 131º F • -25º to +55º C 
Cooling Natural convection
Weight 52.9 lbs • 24 kg
Dimension 17.7 17.7 x 17.3 x 5.1 in • 450 x 440 x 130 mm
Mounting Wall or pole mounting (Rack mounting option available)
MTBF 250,000 hours

VHF & UHF DIGITAL SIGNAL BOOSTERS:


Specification Value
Type Digital Signal Boosters
Frequency range VHF: 136-174 MHz / UHF: 450 - 512 MHz 
Internal duplexer Multiple bandwidth options available, see table
Number of Channels 32 per band
Channel Bandwidth 100KHz, 75KHz, 62.5KHz, 50KHz, 37.5KHz, 25KHz & 12.5KHz 
Number of BWA filters 2 per band
Gain, maximum* 85 dB +/- 2.0 dB
Passband ripple +/- 3 dB
Gain, manual control 28dB range, digitally controlled in 1dB steps
Antenna isolation Max Gain + 20dB
Composite output power, DL* VHF: +24 dBm, UHF: +30 dBm
Composite output power, UL * VHF & UHF: +24 dBm per band
IM and spurious generation <>
Simplex option Configurable per channel
Noise figure 9.0 dB max at maximum gain
Impedance 50Ω
Group delay
  • Channel Selective 100KHz, 12.6µS
  • Channel Selective 75KHz, 14.9µS
  • Channel Selective 62.5KHz, 16.8µS
  • Channel Selective 50KHz, 19.6µS
  • Channel Selective 37.5KHz, 24.1µS
  • Channel Selective 25KHz, 33.4µS
  • Channel Selective 12.5KHz, 62.1µS
  • or Band selective: 3.5 to 6.5µS, depending on BWA 
Maximum input power, no damage 0 dBm (UL)
-35dBm (DL)
RF Connectors N(f) as standard
RF Input/Output impedance 50Ω
Uplink squelch function Yes, user selectable, to avoid UL noise when no carriers present, by time slot and by channel  
Self diagnostic platform Microprocessor based
Alarms Yes, amplifiers status, power amplifiers status, power supply failure, battery backup failure, temperature, AGC, RF overload, poor antenna isolation. 
Local management and supervising Local access via USB and Ethernet (web browser) 
RoHS compliance Yes
Power Supply 110VAC 60Hz & +24VDC 
Power Consumption Single Band 60W; Dual Band 70W 
Housing NEMA4 
Temperature range -13º to 131º F • -25º to +55º C
Cooling Natural convection
Dimensions

Cabinet Type “C”: 27.2 x 20.0 x 9.0 in (690.88 x 508 x 228.6mm)
Cabinet Type “E”: 30.0x 24.0 x 12.0 in (762 x 609.6 x 304.8 mm) 

Mounting Wall mounting
MTBF <50,000>
FCC ID P3TDH14-1A

Agency Listings

  • NFPA Compliance
  • IFC Compliance
  • FCC
  • UL2524 2nd Edition Listing

Resources

Basket Size :
0 MB out of 50 MB

Document Name Asset Type Type & Size Modified Date
Brochures pdf | 2.49 MB 02/01/2023
Data Sheets pdf | 0.15 MB 01/26/2023
Data Sheets pdf | 0.31 MB 01/26/2023
Data Sheets pdf | 0.15 MB 01/26/2023
Data Sheets pdf | 0.19 MB 01/26/2023
Data Sheets pdf | 0.21 MB 01/26/2023
Data Sheets pdf | 0.15 MB 01/26/2023
Data Sheets pdf | 0.23 MB 01/26/2023
Data Sheets pdf | 0.25 MB 01/26/2023
Data Sheets pdf | 0.22 MB 01/26/2023
Data Sheets pdf | 0.28 MB 01/26/2023
Data Sheets zip | 9.49 MB 02/01/2023
Data Sheets pdf | 0.08 MB 01/26/2023
Data Sheets pdf | 0.24 MB 02/11/2021
Data Sheets pdf | 0.25 MB 02/11/2021
Data Sheets pdf | 0.17 MB 01/26/2023
References pdf | 0.08 MB 02/01/2023

Media & Visuals

NOTIFIER BDA Video